SubSpace Capsule Network

SubSpace Capsule Network

Abstract

Convolutional neural networks (CNNs) have become a key asset to most of fields in AI. Despite their successful performance, CNNs suffer from a major drawback. They fail to capture the hierarchy of spatial relation among different parts of an entity. As a remedy to this problem, the idea of capsules was proposed by Hinton. In this paper, we propose the SubSpace Capsule Network (SCN) that exploits the idea of capsule networks to model possible variations in the appearance or implicitly-defined properties of an entity through a group of capsule subspaces instead of simply grouping neurons to create capsules. A capsule is created by projecting an input feature vector from a lower layer onto the capsule subspace using a learnable transformation. This transformation finds the degree of alignment of the input with the properties modeled by the capsule subspace.

We show that SCN is a general capsule network that can successfully be applied to both discriminative and generative models without incurring computational overhead compared to CNN during test time. Effectiveness of SCN is evaluated through a comprehensive set of experiments on supervised image classification, semi-supervised image classification and high-resolution image generation tasks using the generative adversarial network (GAN) framework. SCN significantly improves the performance of the baseline models in all 3 tasks.

1 Introduction

In the recent years, convolutional neural networks (CNNs) have become a key asset to most of fields in AI. Various tasks in computer vision, reinforcement learning, natural language and speech processing systems have achieved significant improvement by using them. New applications like music generation [7], visual text correction [22], online fashion recommendation [13] are founded on the feature learning capability of CNN architectures. Despite their successful performance, CNNs suffer from a major drawback. They fail to capture the hierarchy of spatial relation among different parts of an entity. As a remedy to this problem, Hinton et al. introduced the idea of Capsule Networks [15]. Capsule networks received a flurry of attention after achieving the state-of-the-art performance on image classification [27], text classification [31], action detection and localization [8], image segmentation tasks [20], etc. Moreover, many efforts have been made to improve the structure of capsule networks [16] [2][30] as a new generation of deep neural networks.

A capsule is defined as a group of neurons that can ultimately model different properties such as pose, texture or deformation of an entity or a part of an entity. Each layer of a capsule network consists of many capsules. In a well-trained capsule network, activation vector of each capsule represents the instantiation parameters of the entity and the length of the capsule scores the presence of that feature or part of that entity In this paper, while we still follow the main definition of capsules, we propose Subspace Capsule Networks (SCNs), which build capsules based on the degree of relevance of an input feature vector to a group of learned subspaces . In SCNs, corresponding to each entity or part of that entity, a specific capsule subspace is learned. Then a capsule is created by projecting the input feature vector onto the capsule subspace using a learned transformation, defined based on the basis of the corresponding capsule subspace. Intuitively speaking, a capsule subspace captures the variation in visual properties; like appearance, pose, texture and deformation; of an object or an implicitly defined feature of that object The length of the output vector of a subspace capsule represents the degree of alignment of an input with the properties modeled by that subspace. Hence, if a subspace capsule has a large activity vector, it means that the input feature vector is highly related to the entity modeled by that subspace and vice versa. This form of creating subspace capsules makes it independent of any form of routing required in capsule network introduced in [27] or [16]. Due to this property, SCN is easily scalable to large network architectures and large datasets.

Closest to our work is the CapProNet model, proposed by [30], in which authors apply subspace-based capsules merely in the last layer of an image classification network and only require capsule length for prediction. In the classification task with classes, a group of capsule subspaces are learned. Then the capsule corresponding to each class is created by orthogonal projection of the input feature vector from backbone model onto the learned subspace. The input image belongs to the class with the largest capsule length. In SCN, unlike CapProNet we are interested in both subspace capsules and norm of capsules.

The summary of our contributions is as follows:


  • The proposed SCN is a general capsule model that can be used without any change in the formulation in both generative models as well as discriminative models.

  • SCN is computationally efficient with no computational overhead during test phase and a negligible computational overhead with help of the method introduced in Section (5) during training, compared to the baselines.

  • When applied in generator model of a GAN, SCN consistently improves the relative FID score of generated samples by at least in all of our experiments.

  • SCN achieves state-of-the-art performance in semi-supervised classification of CIFAR10 and SVH datasets and improves the relative error rate of the baseline models by at least for these 2 datasets.

  • SCN is easily scalable to large architectures and datasets like ImageNet. When applies on the last block of the Resnet model, it decreases the Top-1 error rate by relatively.

The rest of the paper is organized as follows. We first briefly review some of the related studies with capsule networks and GAN models in Section 2. Subspace Capsule Network is formally presented in Section 3 followed by studying the effects of SCN on the GAN framework in Section 4. Implementation details are discussed in Section  5. We evaluate the performance of SCN in Section  6 and the conclusion is presented in Section 7.

2 Related Work

The idea of capsule networks was first introduced in Transforming auto-encoders, where Hinton et al. pointed out that CNNs cannot achieve viewpoint invariance just by looking at the activity of a single neuron, and a more complex structure like a capsule is necessary. Output of a capsule is a vector that summarizes information about an entity or part of that entity. The main advantages of capsule networks is that the part-whole relation can be captured through the capsules of consecutive layers. [27] define a capsule as a group of neurons, whose orientation of its output vector represents the instantiation parameters of a visual entity modeled by that capsule and its length represents the probability of entity’s existence. They use dynamic routing between capsules to capture the part-whole relationship. Dynamic routing works based on measuring the agreement of two capsule in consecutive layers using scalar product of their capsule vectors. The subsequent paper [16] extends the idea of capsule by separating it into a pose matrix and an activation probability. Dynamic routing is updated to EM-routing algorithm, which is a more efficient way in measuring the agreement between capsules. The new capsule structure leads to the state-of-the-art performance in classification task of SmallNorb dataset. [29] use capsule idea in low-resolution image recognition.

Figure 1: MNIST samples are generated by varying each dimension of capsules of first layer by a value in the range of

The idea of 3D capsules introduced in [8] to tackle action detection and localization problem. CapProNet [30] proposes learning a group of capsule subspaces in the final layer of a CNN for the image classification task. Capsule network was also applied on medical image segmentation task by [20] and achieve competitive results based on the convolution-deconvolution capsule network structure.

The common point among all of these studies is that they all try to solve a discriminative task, like classification, image segmentation, and action detection using a capsule network. There have been a few attempts in using the capsule architecture in a generative model. CapsuleGAN [17] applies capsule network in the discriminator of a GAN to improve the quality of generated samples and CapsPix2Pix  [3] uses convolution capsules to synthesise images conditioned on segmentation labels to pre-train segmentation models for the medical image segmentation task. Since the introduction of GANs by [11], many efforts have been made to improve the stability of training and quality of generated samples. Among them Wasserstein loss with gradient penalty [1][12] and Spectral Normalization [23] successfully stabilize the training process by enforcing Lipschitz continuity on discriminator and ProgressiveGAN [18] and BigGAN [4] generate high-quality samples by improving the architecture.

In this paper, we exploit the inherent property of subspace capsules, which is modeling the variation in appearance of a visual entity in a GAN model, to produce diverse and high-quality image samples. We also show the superiority of our proposed model in semi-supervised image classification using the GAN framework and also supervised image classification.

3 Subspace Capsule Networks

In this section, we formalize the idea of subspace capsule networks (SCNs) by presenting their main components. In each layer, a SCN learns a group of capsule subspaces, each of which captures possible variations of an implicitly defined visual entity. An input from the lower layer is projected onto each of these capsule subspaces to create new capsules. If the input and a capsule subspace are related; for instance, the input is a part of the entity represented by a capsule subspace; the output vector (projection of the input vector on to the the corresponding subspace) will be large. Moreover, the orientation of a capsule vector represents the properties of that entity.

Since the key component of a SCN is finding the level of alignment of input feature vectors and capsule subspaces, we elaborate on the proposed projection matrix and formulate subspace capsules. Then, capsule activation functions are presented followed by subspace capsule convolution layer and the idea of subspace capsule mean pooling.

Projection onto a Capsule Subspace

For the layer , suppose is an input feature vector from a lower layer . Suppose a capsule subspace with dimensions is formed as the span of the columns of the weight matrix , where .

The most straight-forward way to find the degree of alignment of feature vector and capsule subspace is to orthogonally project onto subspace . This problem has a closed-form solution as follows

(1)

where is the matrix of orthogonal projection onto , and is the projection of onto . The larger the length of , the more correlated and capsule subspace are. In other words, has more of the properties modeled by .

However, the projection matrix has the major drawback of being a square matrix. This means that if we create a capsule by projecting the feature vector onto capsule subspace using , that capsule is still in the -dimensional space. Practically speaking, if is large, which is usually the case in deep models, having different capsule types using the orthogonal projection matrix would be impossible since it demands a lots of memory. To be able to benefit from various sizes of capsules through the sequence of subspace capsule layers, one needs a transformation that allows the input feature vector to be mapped onto the -dimensional space of capsule subspace, while it still preserves the relation among the capsules in the consecutive layers of network. We propose to employ an intermediate domain indicated by a transformation matrix in order to exploit capsule subspaces. This matrix is derived by decomposing the orthogonal projection matrix as

(2)

where

(3a)
(3b)

Here is the transformation that maps the input feature vector into the -dimensional capsule space1, and is the transformation that projects vectors in the capsule space back to the original -dimensional space of input feature vector . Now, the capsule that corresponds to the capsule subspace can be created by projecting feature vector onto the -dimensional capsule space as

(4)

Here, indicates the low-dimensional representation of in the capsule space. Matrix is a semi-definite and symmetric matrix. Thus its decomposition as suggested in Equation (2) has special properties. We claim that a capsule created using has the same information about the instantiation parameters and also the score of presence of features, as it would be created by transformation . Proof of this claim follows from the Theorem 1.

Theorem 1

Let , as defined in (1), denote an orthogonal projection matrix onto the subspace spanned by columns of the weight matrix . Assume is decomposed into two matrices and as in (2). Then, the transformation matrix is an isomorphic transformation between and , i.e., .

The following can be concluded from Theorem 1.

  • The norm of the capsule vector defined in Equation (4) represents the score of features modeled by in the input feature vector , since , where denotes that -norm of a vector.

  • For two input feature vectors and , the relation between their corresponding capsules and is the same as the relation between and . For instance the angle between and is the same as the angle between and .

(a) Generator
(b) Discriminator
Figure 2: a) In the generator, the latent representation is projected onto 10 capsule sbspaces with dimension in the first layer. The capsule with largest vector is selected and reshaped to a cube of , then up-sampled to double the spatial resolution to . This cube goes through 2 layers of sc-conv with 8 capsule types of 16 and 8 capsule dimensions, respectively, each followed by upsampling operation to get to the resolution of . The final sc-conv layer has 8 subspace capsule types each with 8 dimension. The output of this layer is fed to a transposed convolution layer to generate the final image. b) The SCN architecture of discriminator component of GAN for SVHN dataset. Features are extracted using 6 convolutional layers, followed by 3 subspace capsule convolution (SC-conv) layers each with 64 subspace capsule types, one subspace capsule mean pool(SC-mean pool) layer and final subspace capsule fully connected (SC-Fc) layer with 10 capsule types.

Activation Function

We apply two types of activation functions on subspace capsule based on our interpretation of the length of the output vector of a capsule. The length of the output vector of a capsule can be interpreted from the confidence perspective. A high confidence for a capsule shows that the input feature vector is highly aligned with the capsule subspace. In other words, the input feature vector contains the entity that is modeled by capsule subspace. We also want to suppress the effect of noisy capsules of layer on activating the capsules of the next layer. Following this perspective we propose “sparking” function given by

(5)

where is a parameter that can be learned.

Intuitively, the proposed activation function tries to increase the capsule certainty, if is related to the entity modeled by capsule subspace , or completely turn the capsule off if the length of it is below the threshold . We initialize in our experiments and update it along with network parameters through the training process using stochastic gradient decent method.

Another possibility is to relate the probability of the presence of an entity modeled by a capsule subspace by the length of the output capsule. For that, we follow [27] and use squashing function defined as

(6)

We found sparking function is more effective in discriminative tasks, i.e., in our (semi-)supervised classification of images; since it outputs sparse feature maps by turning off noisy capsules which leads to faster convergence. Noisy capsules in each layer are those capsules represent the properties that are not related to the input image and would have a small activity vector. While in generative models, having small but non-zero values by applying squashing activation function on capsules leads to the higher quality of generated samples.

Subspace Capsule Convolution

SCN can also benefit from the idea of weight sharing of CNNs by using the same subspace capsule types in all spatial locations of an image.

In subspace capsule convolution, if the input has feature maps, and we want to create a dimensional subspace capsule convolution kernel with receptive field of , we need to build the transformation matrix as defined in Equation (3b), based on a weight matrix . We can treat each row of the projection matrix as one convolution kernel of size , that convolves over input feature maps and generates a single element of output capsule. So if gets reorganized into a 4-dimensional tensor with the shape of , then it can be used as the kernel of regular convolution operation and the capsule corresponds to each spatial location would be placed along the output feature maps. Now, if we want to have subspace capsule types, we can create a group of projection matrices , after reorganizing each of them to a 4-dimensional tensor, and then concatenate them to create a kernel of shape . From now on, we represent the kernel of a Subspace capsule convolution layer with a tuple of .

Subspace Capsule Mean Pooling

The idea of mean pooling comes naturally after subspace capsule convolutions. In subspace capsule convolution, capsules of the same type represent the same visual property regardless of spatial positions. So it is a safe assumption that capsules of the same type in a small receptive field of have similar orientation and a single capsule with mean of those capsule vectors can represent all of them.

Gradient Analysis

Subspace capsule networks are trained based on the stochastic gradient descent methods. So analyzing the gradient that is used to update in each step clarifies how SCN learns capsule subspaces.

Assume we have a loss function and we want to differentiate it with respect to the weight matrix , the basis of subspace , through the projection onto subspace (Equation 3b). For the sake of simplicity we first assume a dimensional capsule subspace, i.e, . Using the chain rule the gradient is given by:

(7)

where is the gradient with respect to the projection matrix and it is computed the same way as the gradient with respect to the kernel of a convolution operation. The term is the projection matrix onto the orthogonal complement of subspace . This shows that the basis of capsule subspace spanned by the columns of only updated along the orthogonal complement of up to the scale . The orthogonal complement of can contain those novel features from that are not yet captured by .

This nice property of gradient can extend to higher dimensional subspaces. Using the chain rule and derivative of inverse of a matrix (Petersen et al. ) the gradient is as follows:

(8)

where is a single non-zero entry matrix corresponding to the gradient of with respect to one of its elements in position . The general case also supports our conclusion from the special case since only stretch the space along the basis of subspace by the scale factor of eigenvalues of .

4 SubSpace Capsule Networks for GANs

So far we have defined all the building blocks of a subspace capsule network. Next, we want to discuss how SCN can be effective in enhancing the performance of GANs. When GAN models are used in semi-supervised learning tasks, like image classification, the discriminator can benefit from SCN ability by modeling the possible variations of visual properties; for instance texture, pose, color corresponding to an entity using a group of capsule subspaces through a sequence of subspace capsule layers. By creating the capsule using projection of input feature vector onto these capsule subspaces, and considering the length of capsules as confidence about the presence of those properties that are modeled by subspaces, the discriminator can be made invariant with respect to the possible deformations of each visual property. GAN models can also leverage the ability of subspace capsule layer in the generator network. A subspace capsule generator consists of multiple subspace capsule layers and each layer has multiple subspace capsule types. When trained, each subspace capsule type models all the possible variation of a visual entity. Now the goal of the generator in each layer is to find the related properties and features that need to be added to the generated image so far. In addition using SCN as generator leads to more diverse generated samples since in each layer, properties are sampled from subspaces that ensure the disentanglement of variation along their basis. In other word, each dimension of a subspace capsule has unique effect on the generated samples. Figure (1) showcases this property of SCN. Each row represents one feature like rotation, thickness of stroke, scale of generated digits and samples are generated by tweaking one dimension of capsules of the first layer of generator in the range of . The generated samples in each row are diverse, and we can move over the appearance manifold of each digit by changing the value of capsule dimension. Figure 2(a) shows the architecture of SCN generator with detailed training process explained in Section 6.

5 Projection Matrix Implementation

The projection matrix as defined in Equation (3b) involves taking the inverse of the square root of matrix , two very computationally expensive operations. If not being properly implemented, these operations can hinder the training process. In this work, we use an stable extension of Denman-Beavers iterative method [6]. It is known that for any symmetric positive (semi-)definite matrix , there exists a unique symmetric positive (semi-)definite square root matrix. Higham et al. proposed in [14] an iterative process that converges to the square root of such matrices. This iterative process is presented below: Initialize and . For

(9)

where is iteration number. It has been shown that and converge to and , respectively. This process only requires matrix multiplication, which fits the best for parallel computation on GPUs. Further, it computes the inverse of square root of matrix simultaneously. In all of our experiments we set the number of iterations as . This iterative process increases the training time negligibly compared to the total training time. For instance, in our training of SCN for large resolution images that all layers of generator are replaced by SCN convolution layers, the training time is increased to 0.0529 sec/img compared to 0.047 sec/img for the baseline.

It is worth noting that when training process completes, the capsule projection matrix is fixed and there is no time overhead for this iterative process.

6 Experimental Results

In this section, we demonstrate the superiority of SCNs on three tasks2: Supervised classification of image data, semi-supervised classification of image data and generating high-quality images on multiple datasets. Datasets: We use CIFAR10 [19], Street View House Number (SVHN) [25], ImageNet [5], CelebA [21], and 3 categories of Lsun dataset, namely bedroom, cat and horse, throughout our experiments.

SCNs for Classification

Semi-supervised classification: For semi-supervised classification, we evaluate the performance of the SCN model on two benchmark datasets of CIFAR10 and SVHN through the GAN framework. To have a fair comparison with the state-of-the-art methods, we use the same network architecture and loss functions for generator and discriminator as the model proposed by [28]

SVHN: In semi-supervised classification of the SVHN dataset, we replace the last 4 layers of the discriminator with subspace capsule layers. Figure 2(b) shows the architecture of SCN discriminator. An input image passes through 6 convolutional layers that produce 128 feature maps of size . These feature maps go through three subspace capsule convolution layers, each layer has 64 different capsule types of 2-dimensional subspace. The first subspace capsule convolution layer has the kernel size of and the last two have kernel size of . We apply the sparking function on all three layers. We feed the capsules of the last subspace capsule convolution layer to a subspace capsule mean pooling layer, with receptive field of , that results in 64 capsule types of size 2, followed by the final subspace capsule fully connected layer with 10, 4-dimensional subspace capsule types. The input image belongs to the class with the largest norm of the output capsule.

CIFAR10: For the CIFAR10 dataset, the architecture of discriminator is similar to that of SVHN, except the subspace capsule convolution layers have 96 capsule types of size 2. The generator architecture for both datasets are the same as baseline architecture [28].

We train the network using Adam optimizer with initial learning rate of with and . We hold out a set of 5000 training samples as our validation set for subspace capsule dimension selection, and fine tune the whole model on all training samples afterward.

Methods CIFAR10 SVHN
= 4000 =1000
Improved GAN[28]
ALI[9]
LSAL[10]
VAT[24]
SCN
Table 1: Classification errors on CIFAR-10 and SVHN datasets compared with the state-of-the-art methods. The error rates with = 4000 and = 1000 labeled training examples are reported.

Table 1 compares the performance of SCN model on semi-supervised image classification of CIFAR10 and SVHN for 4000 and 1000 labeled samples, respectively.

Model Depth SC-Fc SC-Conv Top1 Top5
Resent 34 - - 27.13 8.84
SCN 34 (1000,4)  (256,2) 25.64 8.17
SCN 34 (1000,4)  (128,4) 25.96 8.35
Table 2: Single crop, Top1 and Top 5 error rate of ImageNet classification with Resnet backbone model. In SC-Fc and SC-Conv columns, in a tuple , is the number of capsule types and is the subspace capsule dimension.

(a) CelebA
(b) LSUN-bedroom
(c) LSUN-horse
(d) LSUN-cat
Figure 3: Generated samples for various datasets. (a) CelebA , (b) Bedroom , (c) Horse . (d) Cat .

Supervised classification: We evaluate the scalability of SCN on large datasets like ImageNet. We also compare the performance of SCN with capsule network proposed by Sabour et al. . on CIFAR10 dataset.

ImageNet: For ImageNet dataset, the last 4 layers of the Resnet model with depth of 34 have been replaced with SCN layers, batch normalization layers in the final block and also the final residual connection are removed. Mean pooling is replaced by the SCN mean pooling. The model was trained using SGD with momentum rate of 0.9 for 100 epochs. The learning rate is initialized as 0.1 and decayed every 30 epochs with the rate of 0.1. Table 2 shows that SCN outperforms the baseline model and reduces the relative top-1 classification error of Resnet by .

CIFAR10: For supervised classification of CIFAR10, we also update the convolution layers of the last bottleneck block of Resnet model with 110 layers to SCN convolution layers. Each of them has 32 capsule types with subspace capsule dimension . Batch normalization layers and residual connection of this block has been removed. Mean pooling is replaced by SCN mean pooling and the final fully connected layer is replaced by SCN fully connected layer with 10 capsule types with subspace capsule dimension . This model archives error rate that significantly outperforms capsule network model [27] with error rate. It also improved the relative error rate of the Resent model by by reducing it from to

SCNs for Image Generation

We evaluate the effectiveness of subspace capsule networks on the image generation task using the GAN framework for various size of images and datasets. In all of our experiments, we build the generator based on subspace capsule networks and the discriminator based on CNNs.

Method CelebA Bedroom Horse Cat
ProgGAN[18]
SCN 6.23 9.94 12.83 29.20

Table 3: Comparison of FID score of SCN with our baseline model. Entries with are our rerun of the baseline.

MNIST: The SCN architecture of generator is shown in Figure 2(a). The first layer has 10 subspace capsule types. Each of them is a dimesional capsule subspace. The output of the first layer is 10 subspace capsules. The capsule with the largest output vector is selected and reshaped to a tensor. This tensor goes through a bilinearly upsampling layer to double the spatial size and a subspace capsule convolution layer with kernel size of . The third layer has the same structure of upsampleing and subspace capsule convolution layer as the second layer except that it has the kernel size of . This is followed by the last subspace capsule convolution layer with kernel size of . The final layer is a transposed convolution layer with the receptive field of with stride of 2 followed by sigmoid activation function. All subspace capsule convolution layers have stride 1 and squashing activation function. The discriminator architecture is composed of 4 convolution layers with receptive field of and stride of 2. We apply batch normalization to all convolutional layers and the activation function is leaky Relu with slope of . This is followed by a global mean pooling and a fully connected layer to 10 output classes.

We follow AC-GAN [26], and add an auxiliary classification loss to ensure that each capsule subspace in the first layer of generator captures the variation of a single class. To this end, we use the index of the capsule with the maximum length in the first layer as the ground truth label for the generated sample. We train this model using Adam optimizer with initial learning rate of 0.0002 for 25 epochs.

High-Resolution Images: We also apply SCN for generating high-resolution images of size and for CelebA and 3 classes of LSUN datasets. To have a fair comparison with the state-of-the-art models, we build SCN generative model based on the model proposed by [18]. Karras et al. suggest to use progressive growing of generator and discriminator models for generating high resolution images. The training starts from a low resolution of and gradually a new block for higher resolution is added to the both generator and discriminator models. This process continues until the networks get to the final resolution of images. Each block in this model consists of an up-sampling step and a convolutionl layer.

For CelebA and LSUN bedroom datasets we generate samples with resolution of . In the generator model, we update all the convolutional layers from resolution to resolution to SCN convolution, and Relu activation function is replaced by squashing activation function. The higher resolution blocks of and are remained intact. For LSUN cat and LSUN horse datasets, we generate samples of size . In the generator network, we replace all convolutional layers for all resolutions with SCN convolution layers followed by squashing activation function. Table 4 presents the configuration of subspace convolutional layers for all experiments. We use the tuple notation of to denote a subspace capsule convolution layer with capsule types, -dimensional capsule subspaces and a receptive field of .

To stabilize training process we adopt Wasserestien loss with gradient penalty. We also benefit from progressive growing through training process. For all of the experiments, the discriminator network is the same as the baseline architecture.

LR CelebA, bedroom cat, horse
FR=128 FR=256
4  (4, 128, 3, 3) (8, 64, 3, 3)
8  (4, 128, 3, 3) (8, 64, 3, 3)
16  (4, 64, 3, 3) (8, 64, 3, 3)
32  (2, 64, 3, 3) (8, 64, 3, 3)
64 - (8, 32, 3, 3)
128 - (4, 32, 3, 3)
256 - (2, 32, 3, 3)
Table 4: Configuration of subspace capsule convolution layers for the generator networks. “LR” and “FR” stand for the layer resolution and final image resolution respectively.
Figure 4: In each row, the first and last samples in the red boxes are generated using two independent noise vectors. The intermediate samples are generated by walking through the linear interpolant of those two noise vectors.

We compare the generated samples quantitatively with the state-of-the-art model using Fréchet Inception Distance (FID). We believe the FID metric is the closest one to the human judgment, since it compares the statistic of features extracted; using Inception model; from generated samples with real samples. Comparison of numerical values of this metric for all datasets are presented in Table 3. In all 4 datasets, SCN consistently improved the relative FID score of generated samples by at least . Figure (3) shows generated samples for these datasets.

Interpolation of Latent Representation: To verify that SCN generator does not merely memorize training samples, we also walk through the manifold space. To this end we choose two random latent representation and , then we use SCN generator to generate samples for s on the linear interpolant of and . Figure (4) shows the interpolated samples for LSUN-horse and LSUN-cat datasets. As it can be seen the transition between pairs of latent representations are smooth and meaningful.

Ablation Study

In this section we analyze the effect of subspace capsule size and also position in the network on performance.

Table 5 reports the semi-supervised classification error rate of SVHN dataset with 1000 labeled training samples, when we update the last fully-connected or convolution layers with various size capsules. Configuration 0 demonstrates the result of the baseline model [28], the first three rows after that correspond to the settings when subspace capsules are only applied on the last layer with various capsule sizes of 2,4 and 8. The configurations [4-6] correspond to the settings when the last 3 convolution layers are replaced in the discriminator with subspace capsule convolution layers. We conclude the following results from this analysis. 1- Subspace capsule layers are effective in improving the overall performance even if we use them only in one layer of the discriminator network. 2- The proper combination of capsule types and the capsule dimension plays a key role in achieving the best performance.

7 Conclusion

In this paper, we proposed SubSpace Capsule Networks, referred to as SCNs, which offer a general capsule model with no computational overhead compared to CNNs. SCN learns a group of capsule subspaces to model the variations in the properties of an entity through the sequence of layers. We successfully applied SCN on the GAN framework, both on generator and discriminator networks leading to the state-of-the-art performance in semi-supervised classification on CIFAR10 and SVHN and significantly improving the quality of generated samples.

config SC-Fc SC-Conv Error rate
0 [28] -  - 8.11
1 (10,2)  - 5.8
2 (10,4)  - 5.12
3 (10,8)  - 5.2
4 - (64,2) 5.26
5 - (32,4) 5.49
6 - (16,8) 5.37
7 (10,4) (64,2) 4.58
Table 5: Error rate of semi-supervised classification for SVHN dataset for 1000 labeled samples for various size and type of subspace capsule. SC-Fc stands for subspace capsule fully connected layer. In a tuple (n,c), n is the number of capsule types and c is the subspace capsule dimension.

8 Acknowledgments

This research is based upon work supported in parts by the National Science Foundation under Grants No. 1741431 and Office of the Director of National Intelligence (ODNI), Intelligence Advanced Research Projects Activity (IARPA), via IARPA RD Contract No. D17PC00345. The views, findings, opinions, and conclusions or recommendations contained herein are those of the authors and should not be interpreted as necessarily representing the official policies or endorsements, either expressed or implied, of the NSF, ODNI, IARPA, or the U.S. Government. The U.S. Government is authorized to reproduce and distribute reprints for Governmental purposes notwithstanding any copyright annotation thereon. We also would like to thank Dr. Jun Wang for generously providing us access to the CASS GPU cluster supported in parts by the US Army/DURIP program W911NF-17-1-0208.

Footnotes

  1. This -dim space is defined by the span of right singular vectors of .
  2. Code:http://github.com/MarziEd/SubSpace-Capsule-Network

References

  1. M. Arjovsky, S. Chintala and L. Bottou (2017) Wasserstein gan. arXiv preprint arXiv:1701.07875. Cited by: §2.
  2. M. T. Bahadori (2018) Spectral capsule networks. Cited by: §1.
  3. C. Bass, T. Dai, B. Billot, K. Arulkumaran, A. Creswell, C. Clopath, V. De Paola and A. A. Bharath (2019) Image synthesis with a convolutional capsule generative adversarial network. In International Conference on Medical Imaging with Deep Learning, pp. 39–62. Cited by: §2.
  4. A. Brock, J. Donahue and K. Simonyan (2018) Large scale gan training for high fidelity natural image synthesis. arXiv preprint arXiv:1809.11096. Cited by: §2.
  5. J. Deng, W. Dong, R. Socher, L.-J. Li, K. Li and L. Fei-Fei (2009) ImageNet: A Large-Scale Hierarchical Image Database. In CVPR09, Cited by: §6.
  6. E. D. Denman and A. N. Beavers Jr (1976) The matrix sign function and computations in systems. Applied mathematics and Computation 2 (1), pp. 63–94. Cited by: §5.
  7. H. Dong, W. Hsiao, L. Yang and Y. Yang (2018) MuseGAN: multi-track sequential generative adversarial networks for symbolic music generation and accompaniment. In Thirty-Second AAAI Conference on Artificial Intelligence, Cited by: §1.
  8. K. Duarte, Y. Rawat and M. Shah (2018) Videocapsulenet: a simplified network for action detection. In Advances in Neural Information Processing Systems, pp. 7621–7630. Cited by: §1, §2.
  9. V. Dumoulin, I. Belghazi, B. Poole, O. Mastropietro, A. Lamb, M. Arjovsky and A. Courville (2016) Adversarially learned inference. arXiv preprint arXiv:1606.00704. Cited by: Table 1.
  10. M. Edraki and G. Qi (2018) Generalized loss-sensitive adversarial learning with manifold margins. In Proceedings of the European Conference on Computer Vision (ECCV), pp. 87–102. Cited by: Table 1.
  11. I. Goodfellow, J. Pouget-Abadie, M. Mirza, B. Xu, D. Warde-Farley, S. Ozair, A. Courville and Y. Bengio (2014) Generative adversarial nets. In Advances in neural information processing systems, pp. 2672–2680. Cited by: §2.
  12. I. Gulrajani, F. Ahmed, M. Arjovsky, V. Dumoulin and A. C. Courville (2017) Improved training of wasserstein gans. In Advances in Neural Information Processing Systems, pp. 5767–5777. Cited by: §2.
  13. X. Han, Z. Wu, Y. Jiang and L. S. Davis (2017) Learning fashion compatibility with bidirectional lstms. In Proceedings of the 25th ACM international conference on Multimedia, pp. 1078–1086. Cited by: §1.
  14. N. J. Higham (1997) Stable iterations for the matrix square root. Numerical Algorithms 15 (2), pp. 227–242. Cited by: §5.
  15. G. E. Hinton, A. Krizhevsky and S. D. Wang (2011) Transforming auto-encoders. In International Conference on Artificial Neural Networks, pp. 44–51. Cited by: §1.
  16. G. E. Hinton, S. Sabour and N. Frosst (2018) Matrix capsules with em routing. Cited by: §1, §1, §2.
  17. A. Jaiswal, W. AbdAlmageed, Y. Wu and P. Natarajan (2018) Capsulegan: generative adversarial capsule network. In European Conference on Computer Vision, pp. 526–535. Cited by: §2.
  18. T. Karras, T. Aila, S. Laine and J. Lehtinen (2017) Progressive growing of gans for improved quality, stability, and variation. arXiv preprint arXiv:1710.10196. Cited by: §2, §6, Table 3.
  19. A. Krizhevsky and G. Hinton (2009) Learning multiple layers of features from tiny images. Technical report Citeseer. Cited by: §6.
  20. R. LaLonde and U. Bagci (2018) Capsules for object segmentation. arXiv preprint arXiv:1804.04241. Cited by: §1, §2.
  21. Z. Liu, P. Luo, X. Wang and X. Tang (2015-12) Deep learning face attributes in the wild. In Proceedings of International Conference on Computer Vision (ICCV), Cited by: §6.
  22. A. Mazaheri and M. Shah (2018) Visual text correction. In Proceedings of the European Conference on Computer Vision (ECCV), pp. 155–171. Cited by: §1.
  23. T. Miyato, T. Kataoka, M. Koyama and Y. Yoshida (2018) Spectral normalization for generative adversarial networks. arXiv preprint arXiv:1802.05957. Cited by: §2.
  24. T. Miyato, S. Maeda, S. Ishii and M. Koyama (2018) Virtual adversarial training: a regularization method for supervised and semi-supervised learning. IEEE transactions on pattern analysis and machine intelligence. Cited by: Table 1.
  25. Y. Netzer, T. Wang, A. Coates, A. Bissacco, B. Wu and A. Y. Ng (2011) Reading digits in natural images with unsupervised feature learning. Cited by: §6.
  26. A. Odena, C. Olah and J. Shlens (2017) Conditional image synthesis with auxiliary classifier gans. In Proceedings of the 34th International Conference on Machine Learning-Volume 70, pp. 2642–2651. Cited by: §6.
  27. S. Sabour, N. Frosst and G. E. Hinton (2017) Dynamic routing between capsules. In Advances in Neural Information Processing Systems, pp. 3856–3866. Cited by: §1, §1, §2, §3, §6.
  28. T. Salimans, I. Goodfellow, W. Zaremba, V. Cheung, A. Radford, X. Chen and X. Chen (2016) Improved techniques for training gans. In Advances in Neural Information Processing Systems 29, D. D. Lee, M. Sugiyama, U. V. Luxburg, I. Guyon and R. Garnett (Eds.), pp. 2234–2242. External Links: Link Cited by: §6, §6, §6, Table 1, Table 5.
  29. M. Singh, S. Nagpal, R. Singh and M. Vatsa (2019) Dual directed capsule network for very low resolution image recognition. In Proceedings of the IEEE International Conference on Computer Vision, pp. 340–349. Cited by: §2.
  30. L. Zhang, M. Edraki and G. Qi (2018) CapProNet: deep feature learning via orthogonal projections onto capsule subspaces. In Advances in Neural Information Processing Systems, pp. 5819–5828. Cited by: §1, §1, §2.
  31. W. Zhao, J. Ye, M. Yang, Z. Lei, S. Zhang and Z. Zhao (2018) Investigating capsule networks with dynamic routing for text classification. arXiv preprint arXiv:1804.00538. Cited by: §1.
Comments 0
Request Comment
You are adding the first comment!
How to quickly get a good reply:
  • Give credit where it’s due by listing out the positive aspects of a paper before getting into which changes should be made.
  • Be specific in your critique, and provide supporting evidence with appropriate references to substantiate general statements.
  • Your comment should inspire ideas to flow and help the author improves the paper.

The better we are at sharing our knowledge with each other, the faster we move forward.
""
The feedback must be of minimum 40 characters and the title a minimum of 5 characters
   
Add comment
Cancel
Loading ...
407029
This is a comment super asjknd jkasnjk adsnkj
Upvote
Downvote
""
The feedback must be of minumum 40 characters
The feedback must be of minumum 40 characters
Submit
Cancel

You are asking your first question!
How to quickly get a good answer:
  • Keep your question short and to the point
  • Check for grammar or spelling errors.
  • Phrase it like a question
Test
Test description