Cascading Failures in Bi-partite Graphs: Model for Systemic Risk Propagation
As economic entities become increasingly interconnected, a shock in a financial network can provoke significant cascading failures throughout the system. To study the systemic risk of financial systems, we create a bi-partite banking network model composed of banks and bank assets and propose a cascading failure model to describe the risk propagation process during crises. We empirically test the model with 2007 US commercial banks balance sheet data and compare the model prediction of the failed banks with the real failed banks after 2007. We find that our model efficiently identifies a significant portion of the actual failed banks reported by Federal Deposit Insurance Corporation. The results suggest that this model could be useful for systemic risk stress testing for financial systems. The model also identifies that commercial rather than residential real estate assets are major culprits for the failure of over 350 US commercial banks during 2008-2011.
March 6, 2018
There have been dramatic advances in the field of complex networks in recent years (1); (2); (3); (4); (5); (6). The Internet, airline routes and electric power grids are all examples of networks in which connectivity between network components is essential.
Because of the strong connectivity, catastrophic cascading failure of nodes in networks can happen when the system is under a shock, especially if the shocked nodes represent hubs, or have high centrality measures in the network (7); (8); (9); (10); (11). So, in order to minimize the systemic risk, these networks should be designed to be robust to external shocks. In the wake of the recent global financial crisis, increased attention has been given to the study of the dynamics of economic systems and to systemic risk in particular. The widespread impact of the current EU sovereign debt crisis and the 2008 world financial crisis show that as economic systems become increasingly interconnected, local exogenous or endogenous shocks can provoke global cascading system failure that is difficult to reverse and that cripples the system for a prolonged period of time. Thus policy makers are compelled to create and implement safety measures that can prevent cascading system failures or soften their systemic impact. Based on the success of complex networks in modeling interconnected systems, applying complex network theory to study economical systems has been under the spot light (12); (13); (14); (15); (16); (17).
There are two channels of risk contagion in the banking system, (i) direct interbank liability linkages between financial institutions and (ii) contagion via changes in bank asset values. The former, which has been given extensive empirical and theoretical study (18); (19); (20); (21); (22), focuses on the dynamics of loss propagation via the complex network of direct counterpart exposures following an initial default. The latter, based on bank financial statements and financial ratio analysis, has received scant attention. A financial shock that contributes to the bankruptcy of a bank in a complex network will cause the bank to sell its assets. If the market’s ability to absorb these sales is less than perfect, the market prices of the assets that the bankrupted bank sells will decrease. Other banks that own similar assets could also fail because of loss in asset value and increased inability to meet liability obligations. This imposes further downward pressure on asset values and contributes to further asset devaluation in the market. Damage in the banking network thus continues to spread, and the result is a cascading of risk propagation throughout the system (23); (24). In this paper we model the risk contagion via changes in asset values in the banking system.
In the past 2008 financial crisis, 371 commercial banks failed between 1/1/2008 and 7/1/2011. The Failed Bank Lists from the Federal Deposit Insurance Corporation (FBL-FDIC) records the names of failed banks and the time when the banks failed. We use this list as an experimental benchmark to our model. The other dataset that we use is the US Commercial Banks Balance Sheet Data (CBBSD) from Wharton Research Data Services, which contains the amounts of assets in each category that the US commercial banks had on their balance sheets (see Method section for more detail). We use this dataset as an input to our model.
The contributions of this paper are as follows. We first analyse the properties of the failed banks from FBL-FDIC, examining the weights in specific assets as well as equity to asset ratios. We then construct a bipartite banking network that is composed of two types of nodes, (i) banks and (ii) bank assets. Link between a bank and a bank asset exists when the bank has the asset on its balance sheet. We also develop a cascading failure model to simulate the crisis spreading process in the bipartite network. We then populate the model by the banks’ balance sheet data (CBBSD) for 2007, and run the cascading failure model by initially introducing a shock to the banking system. We compared the failed banks identified by model with the actual failed banks from the FBL-FDIC from 2008 to 2011, and find that our model simulates well the crisis spreading process and identifies a significant portion of the actual failed banks. Thus, we suggest that our model could be useful to stress test systemic risk of the banking system. For example, we can test each particular asset or groups of assets influence on the overall financial system i.e. if the agricultural assets drop by in value, we can study which banks could be vulnerable to failure, and offer policy suggestions to prevent such failure, such as requirement to reduce exposure to agricultural loans or closely monitor the exposed banks. Finally, we show that sharp transition can occur in the model as parameters change. The bank network can switch between two distinct regions, stable and unstable, which means that the banking system can either survive and be healthy or completely collapse. Because it is important that policy makers keep the world economic system in the stable region, we suggest that our model for systemic risk propagation might also be applicable to other complex financial systems, e.g., to model how sovereign debt value deterioration affects the global banking system or how the depreciation or appreciation of certain currencies impact the world economy.
Properties of failed banks. To build a sound banking system network and systemic risk cascading failure model, we need to study the properties of the failed banks. The asset portfolios of commercial banks contain such asset categories as commercial loans, residential mortgages, and short and long-term investments. We model banks according to how they construct their asset portfolios (upper panel of fig. 1). For each bank, the CBBSD contains 13 different non-overlapping asset categories, e.g., bank owns amounts of each asset, respectively. The total asset value and total liability value of a bank are obtained from CBBSD dataset. The weight of each asset in the overall asset portfolio of a bank is then defined as . From the perspective of the asset categories, we define the total market value of an asset as . Thus the market share of bank in asset is .
To study the properties of failed banks between 2008 and 2011, we focus on the weight of each bank’s assets. For certain assets, we find that the asset weight distributions for all banks differ from the asset weight distributions for failed banks. Figures 2(a) and 2(c) show that, unlike survived banks, failed banks cluster in a region heavily weighted with construction and development loans and loans secured by nonfarm nonresidential properties. Failed banks have less agricultural loans in their asset portfolios compared to survived banks (fig. 2(d)). These results confirm the nature of the most recent financial crisis of 2007–2011 in which bank failures were largely caused by real estate-based loans, including loans for construction and land development and loans secured by nonfarm nonresidential properties (25). In this kind of financial crisis, banks with greater agricultural loan assets are more financially robust (26). Figure 2(e) shows that failed banks tend to have lower equity to asset ratios, i.e. failed banks generally had higher leverage ratios than survived banks during the financial crisis of 2008-2011 (27).
Cascading failure propagation model. To study the systemic risk of the banking system as complex networks, we construct a cascading failure model based on the facts presented in the previous section.
We first build a bipartite network which contains two types of nodes, banks on one hand and bank assets on the other. Link exists between a bank and an asset when the bank has the asset on its balance sheet. No links between banks or between assets exist. To simulate the cascading failure process, we develop and apply the following model with three parameters , and (illustrated in fig. 1):
We initially shock certain asset , reducing the Total Market Value of asset to fraction of its original value, . The smaller the is, the larger the shock. When is 0, the total market value of asset is wiped out. When is 1, no shock is imposed.
When the market deteriorates, each bank that owns the shocked asset will experience reduction in value, where is the amount of asset that is on bank ’s balance sheet.
When the total asset value of a bank declines to a level below the level of promised payments on the debt, it causes distress or default. The total asset value that triggers an incidence of distress lies somewhere between the book value of total liabilities and short-term liabilities. In the corporate sector default analysis, Moody’s Analytics used the sum of short-term debt, interest payments and half of long-term debt (28); (29); (30) as the distress barrier. However, in the past financial crisis, external aid from other financial institutes or from the government played a significant role in distorting this distress barrier, thus even when a bank’s total value of assets was below its liabilities, the bank could still survive. We describe these combined effects using random number that is uniformly distributed in range , where is a parameter controlling tolerance of a bank’s assets being below its liabilities. We define the distress barrier to be , such that a bank fails when . For such distress barrier with evolving randomness, the probability for a bank to fail can be written as
We assume that when a bank fails, the overall market value of each asset that the failed bank owns suffers value deduction, where is a third parameter in the model that describes the market’s reaction to a bank failure. The unit price of asset becomes of its original price. That is because the failed banks need to sell assets to meet their liabilities and the market’s ability to absorb this sale is not perfect, which leads to price decrease of the affected assets. The loss of the market value of each asset is proportional to , the amount of asset that the failed bank owns. Depending on the liquidity of an asset, can be between 0 and 1. When an asset is extremely liquid, the market value of the asset will not be adversely affected by asset sales, . When the market is extremely illiquid, then the value of asset could potentially have zero value. Thus the aggregated total market value of asset will be reduced to , which corresponds to .
Further deterioration of asset values can then contribute to failure of more banks. Thus the damage in the bipartite network spreads between banks and assets bidirectionally until the cascading failure stops.
Usually financial crises start with a burst of economic bubbles. The correspondence of the model’s initial shock parameter in reality can be described as the drop of certain asset value at the beginning of a crisis. For example, when the dot-com bubble burst, the technology heavy NASDAQ Composite index lost percents of its value, plunging from the peak of 5048 in March 10, 2000 to the 1720 in April 2, 2001.
Empirical test and analysis. To empirically test our model, we introduce a shock into the banking system by reducing percentage of the value of a single asset . We then monitor the progression of bank failure until the cascading process stops. We examine two distinct groups of banks 1) all the analyzed banks from CBBSD dataset, and 2) the banks from the FDL-FDIC failed bank list. We then study the fraction of banks that were identified as survived by our model in both groups. We plot both of these fractions versus the sizes of initial shocks in fig. 3, for parameter . The four plots correspond to four typical assets being initially shocked respectively. Figure 3(a) and figure 3(c) show that when the commercial real estate loans, i.e. loans for construction and land development and loans secured by nonfarm nonresidential properties, suffer initial shock respectively, the survival rate of the banks from the first group (all banks), according to our model, is distinctly above the survival rate of the second group of banks (FBL-FDIC failed banks list). This illustrates that when the commercial real estate loans are initially shocked, the model can identify the actual failed banks efficiently. Figures 3(b) and 3(d) show that when we impose initial shock on loans secured by 1-4 family residual properties or agricultural loans, the model does not clearly separate the two groups of banks. This result indicates that the commercial bank failures during the 2008 financial crisis stems from value deterioration of commercial real estate loans.
To quantitatively test the efficiency of the model in identifying failed banks, we use the receiver-operating-characteristic (ROC) curve analysis, which plots the fraction of true positives out of the positives and the fraction of false positive out of the negatives for a binary classifier system. ROC curve analysis is a standard method in signal detection theory as well as in psychology, medicine and biometrics (31). We choose a parameter combination of , and to run the model to determine which banks fail, and compare this prediction with the FDIC list of failed banks. The true positive rate is defined as the fraction of the actual failed banks that are also identified as failed in our model. The false positive rate is the fraction of banks that are not on the FDIC list of failed banks but are identified as failing by our model. Each point in the ROC curve corresponds to one parameter combination. A complete random guess would give points along the diagonal line from the left bottom to the top right corner. The more a point is above the diagonal line, the stronger predictive power the model has.
We firstly impose the initial shock to the construction and land development loans and plot the ROC curves in the top row of fig. 4. As fig. 4(a) shows, when the false-positive rate is below 0.2 we have a relatively high true-positive to false-positive ratio. For example, the four black dots in fig. 4(a) represent the false-positive rate and true positive rate pairs (0.06, 0.5), (0.1, 0.61), (0.15, 0.72) and (0.2, 0.78) respectively. The pair (0.06, 0.5) corresponds to the parameter combination , which means using this parameter combination, the model can identify of the actual failed banks that are on the FBL-FDIC with cost of false positive prediction. Overall, the ROC curve is bended well above the diagonal curve, which means the model captures a significant portion of the real-world behavior and has predictive power.
However, fig. 4(a) alone is not enough to justify our complex networks model as necessary model to describe the systemic risk in this banking system. If all of the actual failed banks owned a large amount of loans for construction and land development, then these banks will fail in the model in the first round of failure after this type of asset is initially shocked. In that case, we only need to look at the weight of this asset in the banks’ portfolio to identify the failed banks. However, we find that the failure of banks does not only occur because of the initial shock to specific assets, but also because of the amplified damage by positive feed back in the complex banking network. The interdependency between banks and the complexity of network structure are crucial to this amplified damage in the system. To demonstrate our findings we conduct separately ROC curve analysis for the first-step prediction (bank failures caused directly by the initial shock on an asset) as well as for the consecutive-steps prediction (bank failures caused by a cascading failure process) as shown in figs. 4(b) and 4(c). We find that in addition to the first-step effective predictions, the consecutive-steps of the model further efficiently identify failed banks that can not be identified by the first-step (ROC curve is above the diagonal line). Fig. 4(d) further shows the number of failed banks correctly identified through the first and consecutive steps of the cascading failure simulation for the four parameter combinations selected from fig. 4(a) (black dots in the figures). In all four cases, the number of failed banks predicted by the consecutive steps represents a significant fraction of the total number of failed banks identified. This result shows that some banks did fail only because of the the complex interconnections between banks in the system, which contributes to the risk contagion in the system. Thus, our model captures the complexity feature of the banking system and can offer prediction better than predictions made only based on balance sheet but without considering interactions between banks.
In addition to construction and land development loans, we also test our cascading failure model by simulating initial shock on other assets. The ROC curves in the bottom row of fig. 4 show that the loans secured by nonfarm nonresidential properties, when initially shocked, have lower predictive power (smaller true-positive to false-positive ratio) compared to the case when initial shock is imposed on loans for construction and land development. ROC curve tests for assets of loans secured by 1-4 family residential properties and agricultural loans, as shown in figs. 5(a) and 5(b), exhibit curves that are almost diagonal, indicating that initial shocks on these two assets have no predictive power on the failure of the banks in the 2007–2011 financial crisis. A truly random behavior would render points along the diagonal line (the so-called line of no discrimination) from the bottom left to the top right corners.
The above ROC curve results suggest that the construction and land development loans and the loans secured by nonfarm nonresidential properties were the two asset types most relevant in the failure of commercial banks during the 2007–2011 financial crisis. It is largely believed that the past financial crisis is caused by residential real estate assets. However, we do not find evidence that loans secured by 1-4 family residential properties are responsible for commercial banks failures. This result is consistent with the conclusion of ref. (25) that the cause of the commercial banks failure between 2007-2011 were largely caused by commercial real estate-based loans rather than residential mortgages.
Our final exploration is of the percolation-like property exhibited by the bank-asset bipartite network. Complex networks usually exhibit percolation phase transitions. As the dependent parameter changes, the giant component of connected clusters in the network can drop to zero at the critical point. In the bank-asset bipartite network model we go beyond the giant component of connected clusters and study all survived banks. Thus, percolation theory can not be applied. However, we find that a percolation-like phenomenon also exists in this model. We study the number of survived banks after the cascading failure process, tuning one parameter and keeping the other two parameters fixed. We find that the number of survived nodes in networks can change dramatically with a small change of parameters. The parameter combination is chosen as the first example in figure 4(d), , , and . We show that the fraction of surviving banks changes smoothly as parameters and change (see figs. 6(a) and 6(c)). But as changes, the fraction of surviving banks changes abruptly at a critical point and displays a first-order-like abrupt phase transition (fig. 6(b)). We show that the first-order-like phase transition also exists for and for a certain parameter combination pool. As an example, we choose another parameter combination (, , and ). We show in the right panel of fig. 6 that a first-order-like phase transition exists for all three parameters, which means the system is at risk of abrupt collapse. Figure 6(d) shows that, when the initial shock parameter for an asset is below a certain threshold, even if the other asset market values are undamaged, almost all banks default because the cascading failure of this single asset (construction and land development loans) significantly affects the overall financial system. Figure 6(e) shows that when the effect of bank failures on asset market values is sufficiently large, the whole banking system is at risk of collapse. Figure 6(f) shows that when is large, i.e., when the bank distress barrier of default is more relaxed, the robustness of the system improves significantly. Thus, the bank-asset bipartite network behaves differently for different parameter combinations. Figure 7 plots the phase diagram for this bank network. Two different regions exist for parameters and . In region I, the bank network system is in a stable state, i.e., after cascading failure a significant number of banks will still survive. In region II, the cascading failure process contributes to the collapse of the entire bank network. Given that the bank network as a complex system exhibits these two distinct states, it is extremely important that policy makers institute rules that will keep the banking system in the stable region.
In this paper, we develop a bipartite network model for systemic risk propagation and specifically study the cascading failure process in the banking system. We first study the properties of the defaulting banks during the 2007–2008 financial crisis, and find that they differ from the properties of the survived banks. We then construct a bipartite banking network that is composed of (i) banks on one hand and (ii) bank assets on the other. We also propose a cascading failure model to simulate the crisis spreading process in banking networks. We introduce a shock into the banking system by reducing a specific asset value and we monitor the cascading effect of this value reduction on banks and on other asset values. We test our model using 2007 balance sheet data by identifying the empirically failed banks between 2008 and 2011, and find through ROC curve analysis that our model simulates well the crisis spreading process and identifies a significant portion of the actual failed banks from the FDIC failed bank database.
Furthermore, studying the cascading failure of banks step by step shows that the complex structure of the bank network indeed contributes to the spreading of financial crisis, which makes a complex network model necessary in describing and predicting the behavior of the banking system. Thus, we suggest that our model could be useful to stress test systemic risk of the banking system. For example, we can stress test the model to predict which banks could be in danger and how many banks could fail if the agricultural assets drop in value. We then offer policy suggestions such as requirement to reduce exposure to agricultural loans or closely monitor vulnerable banks. Then the model also indicates possible ways to mitigate the propagation of financial crisis. From the model we know that risk in the banking system propagates bidirectionally between assets and banks. Suppressing propagation either way could be very helpful to mitigating such catastrophes. The first way is to provide liquidity to the market, thus when distressed banks need to sell assets, the market will not overreact. The second way to curb systemic risk contagion is to ensure that banks are solvent and have healthy balance sheets, i.e. no excess leverage, higher capital requirements, appropriate levels of liquid assets, etc. in order to be able to absorb shocks to the asset value. Possible measures could be to pay a periodic fee to a supervising institution during non-crisis periods in exchange for obtaining emergency liquidity, as proposed by Perotti et al. (34).
Lastly, we show that as the parameters of the system change the bank network can switch between two distinct regions, stable and unstable, which are separated by a so-called phase transition boundary. We suggest that the bank network be understood in complex system terms and that its closeness to the phase transition boundary be diligently monitored in order to forestall system failure.
We suggest that our model for systemic risk propagation might be applicable to other complex systems, e.g., to study the effect of sovereign debt value deterioration on the global banking system or to analyze the impact of depreciation or appreciation of certain currencies on the world economy.
Data Sets And Explanations. We use two data sets in this paper. The first is the Commercial Banks - Balance Sheet Data (CBBSD) from Wharton Research Data Services (32) for the time period 1/1/1976 to 12/31/2008, which contains the amounts of 13 specific assets and the total assets, total liabilities, and total equities for each bank. We enumerate the assets from 0 to 12 to simplify the problem and categorize the assets into real estate loans, other loans, and other assets. These assets are listed in Table 1. We study the data for the year 2007, which contains 7,846 US banks. All banks have total assets data, but 21,171 data spots out of the total data spots for specific assets are blank. For banks with complete data, it is confirmed that the total asset value equals the sum of individual asset. The absent data causes the sum of the individual assets to be lower than the total assets. Furthermore, in some cases, the sum of the individual assets can be smaller than the bank’s total liabilities, which leads the banks to fail before any shock is introduced in the model. Thus we need to ensure that the sum of the individual asset values is equal to the total assets value, by allocating the difference between the total asset and available individual assets to the missing assets. If a bank has more than one missing asset, the distribution of the difference to the assets is proportional to the average amount of these assets on the balance sheets of other banks.
The step-by-step methodology is described as follows:
For each bank , we calculate the weight of asset in the bank’s portfolio.
We then calculate the average weight of each asset , where is the total number of banks.
From the total asset and known specific assets, we calculate the total amount for the unknown assets, which is . We then distribute this total amount to each unknown asset by their average weight ()ratios. For example, if a bank lacks data on asset and asset , the amount of asset is calculated as .
The second dataset that we use is the Failed Bank List from the Federal Deposit Insurance Corporation (FBL-FDIC) (33), which shows that 371 banks failed during the 1/1/2008 – 7/1/2011 period and that only 27 banks failed during the 2000–2007 period. We use this representative dataset to empirically test our model for the 2008 financial crisis. Of the 371 banks in the FBL-FDIC dataset, 278 banks are included in the Commercial Banks - Balance Sheet Data dataset in 2007.
We wish to thank the European Commission FET Open Project ”FOC” 255987 and ”FOC-INCO” 297149, ONR, DTRA, the European EPIWORK, MULTIPLEX and LINC projects, DFG , the Next Generation Infrastructures (Bsik) and the Israel Science Foundation for financial support.
All authors conceived and designed the research. X. H. carried out the numerical experiments. X. H., I. V. and S. H. analyzed the simulation results. All authors wrote the manuscript.
The authors declare no competing financial interests.
|index||Balance Sheet Asset Variables||Rows|
|Real Estate Loans||0||Loans for construction and land development||6139||0.082|
|1||Loans secured by farmland||5932||0.038|
|2||Loans secured by 1-4 family residential properties||7553||0.167|
|3||Loans secured by multifamily (>5) residential properties||5381||0.013|
|4||Loans secured by nonfarm nonresidential properties.||7495||0.150|
|Other Loans||5||Agricultural loans||5167||0.041|
|6||Commercial and industrial loans||3117||0.031|
|7||Loans to individuals||7504||0.097|
|8||All other loans||7049||0.171|
|9||Obligations (other than securities and leases) of states and political subdivision in the U.S.||7559||0.046|
|Other Assets||10||Held-to-maturity securities||5924||0.003|
|11||Available-for-sale securities, total||3445||0.004|
|12||Premises and fixed assets including capitalized lease||7751||0.020|
- Watts, D. J. & Strogatz, S. H. Collective dynamics of âsmall-worldâ networks. Nature 393, 440â442 (1998).
- Barabási, A. L. & Albert, R. Emergence of scaling in random networks. Science 286, 509â512 (1999).
- Albert, R. & Barabási, A. L. Statistical mechanics of complex networks. Rev. Mod. Phys. 74, 47 (2002).
- Newman, M. E. J. et al. Large Scale The Structure and Dynamic of Networks (Princeton University Press, Princeton, NJ, 2006).
- Cohen, R. & Havlin, S. Complex Networks: Structure, Robustness and Function (Cambridge University Press, England, 2010).
- Buldyrev, S. V., Parshani, R., Paul, G., Stanley, H. E. & Havlin, S. Catastrophic cascade of failures in interdependent networks. Nature 464, 1025-1028 (2010).
- Cohen, R., Erez, K., ben-Avraham, D. and Havlin, S. Breakdown of the Internet under Intentional Attack. Phys. Rev. Lett. 86, 3682â3685 (2001).
- Motter, A. E. and Lai, Y. Cascade-based attacks on complex networks. Phys. Rev. E 66, 065102(R) (2002).
- Smart, A. G., Amaral, L. A. N. and Ottino, J. M. Cascading failure and robustness in metabolic networks. Proc. Natl. Acad. Sci. USA 99, 15112â15117 (2008).
- Vespignani, A. Complex networks: The fragility of interdependency. Nature 464, 984-985 (2010).
- Huang, X., Gao, J., Buldyrev, S. V., Havlin, S. and Stanley, H. E. Robustness of interdependent networks under targeted attack. Phys. Rev. E 83, 065101(R) (2011).
- May, R. M., Levin, S. A. & Sugihara, G. Complex systems: Ecology for bankers. Nature 451, 893-895 (2008).
- Garas, A., Argyrakis, P., Rozenblat, C., Tomassini, M. & Havlin, S., Worldwide spreading of economic crisis. New J. Phys. 12, 113043 (2010).
- Johnson, N. & Lux, T. Financial systems: Ecology and economics. Nature 469, 302-303 (2011).
- Haldane, A. G. & May, R. M. Systemic risk in banking ecosystems. Nature 469, 351-355 (2011).
- Schweitzer, F. et al. Economic networks: the new challenges. Science 325, 422-425 (2012).
- Battiston, S. et al. DebtRank: Too Central to Fail? Financial Networks, the FED and Systemic Risk Scientific Reports 2 541 (2012).
- Wells, S. UK interbank exposures: systemic risk implications. Bank of England Financial Stability Review December, 175-182 (2002).
- Furfine, C. H. Interbank exposures: quantifying the risk of contagion. Journal of Money, Credit and Banking 35, 111-128 (2003).
- Upper, C. & Worms, A. Estimating bilateral exposures in the German interbank market: is there a danger of contagion? European Economic Review 48, 827-49 (2004).
- Elsinger, H., Lehar, A. & Summer, M. Risk assessment for banking systems. Management Science 52, 1301 (2006).
- Nier, E., Yang, J., Yorulmazer, T. & Alentorn, A. Network models and financial stability. J. Econ. Dyn. Control 31, 2033 (2007).
- Cifuentes, R., Ferrucci, G. & Shin, H. S. Liquidity risk and contagion. Journal of the European Economic Association 3, 556 (2005).
- Tsatskis, I. Systemic losses in banking networks: indirect interaction of nodes via asset prices. arXiv:1203.6778v1 (2012).
- Cole, R. A. & White, L. J. Déjà Vu All Over Again: The causes of US commercial bank failures this time around. Journal of Financial Services Research Forthcoming. Available at SSRN: http://ssrn.com/abstract=1644983 (2011).
- Corner, G. S. Agriculture banks are outperforming their peers, but how long will it last? Central Banker Fall, (2011).
- Gopalan, Y. Earliest Indicator of bank failure is deterioration in earnings. Central Banker Spring, (2010).
- Merton, R. C. On the pricing of corporate debt: the risk structure of interest rates, The Journal of Finance 29, 449-484 (1974).
- Crosbie, P. & Bohn, J. Modeling default risk. Moody’s KMV (2003).
- Gray, D. F., Merton, R. C. & Bodie, Z. Contingent claims approach to measuring and managing sovereign credit risk. Special Issue on Credit Analysis. Journal of Investment Management 5. 5-28 (2007).
- Swets, J. A. Signal detection theory and ROC analysis in psychology and diagnostics : collected papers, ( Lawrence Erlbaum Associates, Mahwah, NJ, 1996).
- https://wrds-web.wharton.upenn.edu/wrds/ (July 1, 2011).
- http://www.fdic.gov/bank/individual/failed/banklist.html (July 1, 2011).
- Perotti, E. & Suarez, J. Liquidity Insurance for Systemic Crises, CEPR Policy Insight, No. 31, February (2009).