A New Family of Low-Complexity Decodable STBCs for Four Transmit Antennas
In this paper we propose a new construction method for rate-1 Fast-Group-Decodable (FGD) Space-Time-Block Codes (STBC)s for transmit antennas. We focus on the case of and we show that the new FGD rate-1 code has the lowest worst-case decoding complexity among existing comparable STBCs. The coding gain of the new rate-1 code is then optimized through constellation stretching and proved to be constant irrespective of the underlying QAM constellation prior to normalization. In a second step, we propose a new rate-2 STBC that multiplexes two of our rate-1 codes by the means of a unitary matrix. A compromise between rate and complexity is then obtained through puncturing our rate-2 code giving rise to a new rate-3/2 code. The proposed codes are compared to existing codes in the literature and simulation results show that our rate-3/2 code has a lower average decoding complexity while our rate-2 code maintains its lower average decoding complexity in the low SNR region at the expense of a small performance loss.
The need for low-complexity decodable STBCs is inevitable in the case of high-rate communications over MIMO systems employing a number of transmit antennas higher than two. The decoding complexity may be evaluated by different measures, namely the worst-case decoding complexity measure and the average decoding complexity measure. The worst-case decoding complexity is defined as the minimum number of times an exhaustive search decoder has to compute the Maximum Likelihood (ML) metric to optimally estimate the transmitted symbols codeword [1, 2], or equivalently the number of leaf nodes in a search tree if a sphere decoder is employed, whereas the average decoding complexity measure may be numerically evaluated as the average number of visited nodes by a sphere decoder in order to optimally estimate the transmitted symbols codeword . Arguably, the first proposed low-complexity rate-1 code for the case of four transmit antennas is the Quasi-Orthogonal (QO)STBC originally proposed by H. Jafarkhani  and later optimized through constellation rotation to provide full diversity [5, 6]. The QOSTBC partially relaxes the orthogonality conditions by allowing two complex symbols to be jointly detected. Subsequently, rate-1, full-diversity QOSTBCs were proposed for an arbitrary number of transmit antennas that subsume the original QOSTBC as a special case . In this general framework, the quasi-orthgonality stands for decoupling the transmitted symbols into two groups of the same size. However, STBCs with lower decoding complexity may be obtained through the concept of multi-group decodability laid by the S. Karmakar et al. in [8, 9]. Indeed, the multi-group decodability generalizes the quasi-orthogonality by allowing more than two groups of symbols to be decoupled not necessarily with the same size.
However, due to the strict rate limitation imposed by the multi-group decodability, another family of STBCs namely Fast Decodable (FD) STBCs  has been proposed. These codes are conditionally multi-group decodable thus enabling the use of the conditional detection technique  which in turn significantly reduces the overall decoding complexity. Recently, STBCs that combine the multi-group decodability and the fast decodability namely the Fast-Group Decodable (FGD) codes have been proposed . These codes are multi-group-group decodable such that each group of symbols is fast decodable. The contributions of this paper are summarized in the following:
We propose a novel systematic construction of rate-1 FGD STBCs for transmit antennas. The rate-1 FGD code for a number of transmit antennas that is not a power of two is obtained by removing the appropriate number of columns from the rate-1 FGD code corresponding to the nearest greater number of antennas that is a power of two (e.g. the rate-1 FGD STBC for three transmit antennas is obtained by removing a single column from the four transmit antennas rate-1 FGD STBC).
We apply our new construction method to the case of four transmit antennas and show that the resulting new 44 rate-1 code can be decoded at half the worst-case decoding complexity of the best known rate-1 STBC.
We propose a new rate-2 STBC through multiplexing two of the new rate-1 codes by the means of a unitary matrix and numerical optimization. We then propose a significant reduction of the worst-decoding complexity at the expense of a rate loss by puncturing the rate-2 code to obtain a new rate-3/2 code.
We compare the proposed codes to existing STBCs in the literature and found through numerical simulations that our rate-3/2 code has a significantly lower average decoding complexity while our rate-2 code is decoded with a lower average decoding complexity at low SNR region. Performance simulations show that this reduction in the decoding complexity comes at the expense of a small performance loss.
The rest of the paper is organized as follows: The system model is defined and the families of low-complexity STBCs are outlined in Section II. In Section III we propose our scheme for the rate-1 FGD codes construction for the case of transmit antennas, and then the FGD code construction method is applied to the case of four transmit antennas giving rise to a new 44 rate-1 STBC. In Section IV, the rate of the proposed code is increased through multiplexing and numerical optimization. Numerical results are provided in Section V, and we conclude the paper in Section VI.
Hereafter, small letters, bold small letters and bold capital letters will designate scalars, vectors and matrices, respectively. If is a matrix, then , and denote the hermitian and the transpose of , respectively. We define the as the operator which, when applied to a matrix, transforms it into a vector by simply concatenating vertically the columns of the corresponding matrix. The operator is the Kronecker product and the operator returns 1 if its scalar input is and -1 otherwise. The operator rounds its argument to the nearest integer. The operator concatenates vertically the real and imaginary parts of its argument. means modulo .
We define the MIMO channel input-output relation as:
where is the number of channel uses, is the number of receive antennas, is the number of transmit antennas, is the received signal matrix, is the code matrix, is the channel matrix with entries , and is the noise matrix with entries . In the case of Linear Dispersion (LD) codes , a STBC that encodes real symbols is expressed as a linear combination of the transmitted symbols as:
with and the are complex matrices called dispersion or weight matrices that are required to be linearly independent over . The MIMO channel model can then be expressed in a useful manner by using (2) as:
Applying the operator to the above equation we obtain:
where is the identity matrix. If , and designate the ’th column of the received signal matrix , the channel matrix and the noise matrix respectively, then equation (4) can be written in matrix form as:
Thus we have:
A real system of equations is be obtained by applying
the operator to the (6):
where , and . Assuming that , the QR decomposition of yields:
where ,, , is a real upper triangular matrix and is a null matrix. Accordingly, the ML estimate may be expressed as:
where is the vector space spanned by information vector . Noting that multiplying a column vector by a unitary matrix does not alter its norm, the above reduces to:
In the following, we will briefly review the known families of low-complexity STBCs and the structures of their corresponding matrices that enable a simplified ML detection.
Ii-a Multi-group decodable codes
Multi-group decodable STBCs are designed to significantly reduce the worst-case decoding complexity by allowing separate detection of disjoint groups of symbols without any loss of performance. This is achieved iff the ML metric can be expressed as a sum of terms depending on disjoint groups of symbols.
For instance if a STBC that encodes real symbols is -group decodable, its worst-case decoding complexity order can be reduced from to with being the size of the used square QAM constellation. The worst-case decoding complexity order can be further reduced to if the conditional detection with hard slicer is employed. In the special case of orthogonal STBCs, the worst-case decoding complexity is as the PAM slicers need only a fixed number of arithmetic operations irrespectively of the square QAM constellation size.
Ii-B Fast decodable codes
A STBC is said to be fast decodable if it is conditionally multi-group decodable.
A STBC that encodes real symbols is said to be FD if its weight matrices are such that:
where is the set of weight matrices associated to the ’th group of symbols.
In this case the conditional detection may be used to significantly reduce the worst-case decoding complexity. The first step consists of evaluating the ML estimate of conditioned on a given value of the rest of the symbols that we may note by . In the second step, the receiver will have to minimize the ML metric only over all the possible values of . For instance, if a STBC that encodes real symbols is FD, its corresponding worst-case decoding complexity order for square QAM constellations is reduced from to . If the FD code is in fact conditionally orthogonal, the worst-case decoding complexity order is reduced to .
Ii-C Fast group decodable codes
A STBC is said to be fast group decodable if it is multi-group decodable such that each group is fast decodable.
A STBC that encodes real symbols is said to be FGD if its weight matrices are such that:
and that the weight matrices within each group are such that:
where (resp. ) denotes the set of weight matrices that constitute the ’th group (resp. the number of inner groups) within the ’th group of symbols .
For instance, if a STBC that encodes real symbols is FGD, its corresponding worst-case decoding complexity order for square QAM constellations is reduced from to . Similarly, if each group is conditionally orthogonal, the worst-case decoding complexity order is equal to .
Iii The proposed FGD scheme
Let the set denote the weight matrices of the square orthogonal STBC for transmit antennas . The proofs of the following propositions are omitted due to space limitations.
The rate of the proposed family of FGD codes is equal to one complex symbol per channel use.
The weight matrices of our new FGD construction method for four and eight transmit antennas are listed in Table VI.
A new rate-1 FGD STBC for four transmit antennas
According to Table VI, the proposed rate-1 STBC in the case of four transmit antennas denoted may be expressed as:
According to Definition 3, the proposed code is a FGD STBC with and such as . Therefore, the worst-case decoding complexity order is . However, the coding gain of is equal to zero, in order to achieve the full-diversity, we resort to the constellation stretching  rather than the constellation rotation technique, otherwise the orthogonal symbols inside each group will be entangled together which in turns will destroy the FGD structure of the proposed code and causes a significant increase in the decoding complexity.
The full diversity code matrix takes the form of (17) where and is chosen to provide a high coding gain. The term is added to normalize the average transmitted power per antenna per time slot.
Taking , ensures the NVD property for the proposed code with a coding gain equal to 1.
Iv The proposed rate-2 code
The proposed rate-2 code denoted is simply obtained by multiplexing two rate-1 codes by means of a unitary matrix. Mathematically speaking, the rate-2 STBC is expressed as:
where and are chosen in order to maximize the coding gain. It was numerically verified for QPSK constellation that taking and maximizes the coding gain which is equal to 1. To decode the proposed code, the receiver evaluates the QR decomposition of the real equivalent channel matrix (7). The corresponding upper-triangular matrix takes the form:
where has no special structure, is an upper triangular matrix and takes the form:
in which indicates a possible non-zero position. For each value of , the decoder scans independently all possible values of and , and assigns to them the corresponding 6 ML estimates of the rest of symbols via hard slicers according to (20)-(21). where:
A rate-3/2 code that we will denote may be easily obtained by puncturing the rate-2 proposed code and may be expressed as:
V Numerical and simulation results
In this section, we compare our proposed codes to comparable low-complexity STBCs existing in the literature in terms of worst-case decoding complexity, average decoding complexity and Bit Error Rate (BER) performance over quasi-static Rayleigh fading channels. One can notice from Table VIII that the worst-case decoding complexity of the proposed rate-3/2 code is half that of the punctured rate-3/2 code in  and is reduced by a factor of w.r.t to the worst-case decoding complexity of the rate-3/2 code in . Moreover, the worst-case decoding complexity of our rate-2 code is half that of the code in .
|The proposed rate-3/2 code|
|The punctured P.Srinath-S.Rajan rate-3/2 code |
|The S.Sirianunpiboon et al. code |
|The proposed rate-2 code|
|The rate-2 P.Srinath-S.Rajan code |
Simulations are carried out in a quasi-static Rayleigh fading channel in the presence of AWGN and 2 receive antennas for our rate-3/2 and rate-2 codes. The ML detection is performed via a depth-first tree traversal with infinite initial radius SD. The radius is updated whenever a leaf node is reached and sibling nodes are visited according to the simplified Schnorr-Euchner enumeration .
From Fig. 1, one can notice that the proposed rate-3/2 code gains about 0.4 dB w.r.t to S.Sirianunpiboon et al. code  while it loses about 0.5 dB w.r.t to the punctured P.Srinath-S.Rajan code  at BER. From Fig. 2, it can be noticed that the average complexity of our rate-3/2 code is significantly less than that of the punctured P.Srinath-S.Rajan code  and roughly equal to that of S.Sirianunpiboon et al. code . From Fig. 3, one can notice that the proposed rate-2 code loses about 0.8 dB w.r.t the P.Srinath-S.Rajan code  at BER. However, from Fig. 4 one can notice that our proposed code maintains its lower average decoding complexity in the low SNR region.
In the present paper we have proposed a systematic approach for the construction of rate-1 FGD codes for an arbitrary number of transmit antennas. This approach when applied to the special case of four transmit antennas results in a new rate-1 FGD STBC that has the smallest worst-case decoding complexity among existing comparable low-complexity STBCs. The coding gain of the proposed FGD rate-1 code was then optimized through constellation stretching. Next we managed to increase the rate to 2 by multiplexing two rate-1 codes through a unitary matrix. A compromise between complexity and throughput may be achieved through puncturing the proposed rate-2 code which results in a new low-complexity rate-3/2 code. The worst-case decoding complexity of the proposed codes is lower than their STBC counterparts in the literature. Simulations results show that the proposed rate-3/2 code offers better performance that the S.Sirianunpiboon et al. code  but loses about 0.5 dB w.r.t the punctured P.Srinath-S.Rajan code  at BER. The proposed rate-2 code loses about 0.8 dB w.r.t the P.Srinath-S.Rajan code  at BER. In terms of average decoding complexity, we found that the proposed rate-3/2 code has a lower average decoding complexity while the proposed rate-2 code maintains its lower average decoding complexity in the low SNR region.
-  E. Biglieri, Yi Hong and E. Viterbo, ”On Fast-Decodable Space-Time Block Codes,” IEEE Trans. Inform. Theory., vol. 55, pp. 524 - 530, 2009.
-  A. Ismail, J. Fiorina, and H. Sari, ”A Novel Construction of 2-group Decodable 4x4 Space-Time Block Codes” Proc. of IEEE Global Communications Conference (Globecom’10), Miami, Florida, USA, 2010.
-  Burg, A. Borgmann, M. Wenk, M. Zellweger, M. Fichtner, W. Bolcskei, H., ”VLSI implementation of MIMO detection using the sphere decoding algorithm”, IEEE Journal of Solid-State Circuits, vol. 40 no. 7, July 2005.
-  H. Jafarkhani, ”A quasi-orthogonal space-time block code”, IEEE Trans. Commun., vol. 49, no. 1, pp. 1-4, Jan 2001.
-  N. Sharma, C.B. Papadias,”Improved quasi-orthogonal codes through constellation rotation”, IEEE Trans. Commun., vol. 51, no. 3, pp. 332-335, Mar 2003.
-  W. Su, X.-G. Xia, ”Signal constellations for quasi-orthogonal space-time block codes with full diversity” IEEE Trans. Inform. Theory., vol. 50, no. 10, pp. 2331 - 2347, 2004.
-  N. Sharma, C.B. Papadias,”Full-Rate Full-Diversity Linear Quasi-Orthogonal Space-Time Codes for Any Number of Transmit Antennas”, EURASIP Journal on Applied Signal Processing, vol. 2004 , no. 9, pp. 1246-1256
-  Sanjay Karmakar and B. Sundar Rajan, ”High-rate, Multi-Symbol-Decodable STBCs from Clifford Algebras,” IEEE Trans. Inform. Theory.,, vol. 55, no. 06, pp. 2682-2695, Jun. 2009.
-  Sanjay Karmakar and B. Sundar Rajan, ”Multigroup-Decodable STBCs from Clifford Algebras,” IEEE Trans. Inform. Theory., vol. 55, no. 01, pp. 223-231, Jan. 2009.
-  S. Sezginer, and H.Sari, ”Full-rate full-diversity space-time codes of reduced decoder complexity,” IEEE Commun. Letters., vol. 11, no. 12, pp. 973-975, Dec 2007.
-  Tian Peng Ren, Yong Liang Guan, Chau Yuen and Rong Jun Shen, ”Fast-group-decodable space-time block code,” Proc. of IEEE Information Theory Workshop (ITW’10), Cairo, Egypt, 2010.
-  P. Marsch, W. Rave, and G.Fettweis, ”Quasi-Orthogonal STBC Using Stretched Constellations for Low Detection Complexity,” Proc. of IEEE Wireless Communications and Networking Conference (WCNC’07), Kowloon, Hong Kong, 2007.
-  J.C Belfiore, F. Oggier and E. Viterbo,”Cyclic Division Algebras: a Tool for Space-Time Coding”, Foundations and Trends in Communications and Information Theory, 13, Jan 2007.
-  B.Hassibi and B.M Hochoawald, ”High-rate codes that are linear in space and time”, IEEE Trans. Infor. Theory, vol. 48, no. 7, July 2002.
-  O. Tirkkonen, A. Hottinen,”Square-matrix embeddable space-time block codes for complex signal constellations”, IEEE Trans. Inform. Theory., vol. 48, no. 2, pp. 384 - 395, Feb 2002.
-  Srinath, K.P. Rajan, B.S., ”Low ML-Decoding Complexity, Large Coding Gain, Full-Rate, Full-Diversity STBCs for 22 and 42 MIMO Systems”, IEEE Journal of Selected Topics in Signal Processing, vol. 3, no. 6, pp. 916 - 927, Dec 2009.
-  S. Sirianunpiboon, Wu Yiyue, A.R. Calderbank, and S.D. Howard, ”Fast Optimal Decoding of Multiplexed Orthogonal Designs by Conditional Optimization”, IEEE Trans. Inform. Theory, vol. 56, no. 3, pp. 1106-1113, May 2010.
-  C. P.Schnorr, and M. Euchner, ”Lattice basis reduction: Improved practical algorithms and solving subset sum problems”, Journal of Mathematical Programming, vol. 66, pp. 181-199, 1994.